Quality House Windows

Many homeowners have now started to tint their house windows. The tinting process, commonly known as solar window film application, is done to the inside of the window. This process is not the same as decorative window tinting which is done purely for a design effect.

House Window tinting is done for a variety of reasons. The most common reason is the reduction of fading from blocking constant sun exposure to your carpet, walls and furniture. Window tinting can block up to 65% of the sunlight that would normally shine through. This helps to extend the life of your home’s contents.

Another important benefit of house window tinting is that it helps to conserve energy. In the summertime reducing the amount of sunlight entering the home will drastically reduce cooling costs. In the winter time the tinting acts as a insulator to keep warm air to escape from the windows. Insulating films also retain up to 55 percent of your home’s heat in winter.

Another benefit of tinting, though less talked about, is the blockage of ultraviolet rays from entering your home. Window tinting can block up to 99% of ultraviolet rays from entering your home. We all know that being exposed to ultraviolet rays over a long period of time is bad for the skin. Tinting allows you to have the feel of sunshine without the harmful effects of it.

Solar window film comes in many varieties. Privacy films can be used as a reflective service for your windows. If you like to have the privacy of no one being able to look into your windows, you can add a tint that creates a mirror effect from the outside. Glare reducing films help to reduce the glare caused by the sun at certain times of the day.

Film installation can be done either by a professional or yourself. They are applied with adhesive so it is important that the windows are clean prior to the application of the film. It is also important that the film is applied to a room temperature window. You do not want to apply the film when the window is hot as the adhesive may not dry correctly causing bubbles to appear in the film. After film is applied it usually takes four to eight days for the film to fully cure to the window.

As you can see there are many reasons to apply window tinting to your home. The most important of these is for energy savings. Window tinting is a low cost solution to make your home energy efficient and should be taken into consideration to help keep costs down.

No comments »

Installing House Windows is not a simple process but with the right approach and tools you can end up saving yourself hundreds of dollars over a contractor installation.

Step 1 – Measuring your house windows
This is the most important piece of the process. It is key that you have accurate measurements before attempting to order a replacement. Make sure to measure at the top, bottom and at least 2 or 3 places in the middle. This will allow you to see if settlement of the house as make the current window an irregular shape. Once you have the dimensions talk to the hardware store rep and explain to him what the measurements are and how you achieved them.

Step 2 – Remove the old window.
While removing the old window make sure to note how it was attached to the house. Ideally you will want to install the new window the say way. Once the old window is removed, make sure that the opening is square and level. Adjusting the window opening now will save you time later when trying to put the new window in. Most openings can be resquared by planing down of the wood surfaces that are out of align.

Step 3 – Installing the new window. In a perfect world, the new window will just pop into the opening and fit like a glove. In most cases you make need to use shims to prop one side of the window to make it level or both sides if the opening is just a bit too large. Depending on the opening size you may need to shim at the top of the window as well.

Step 4 – Fastening the new window
Most replacement windows will come with a wood frame, if this is the case you can simply fasten it to the house with wood screws. Other types of windows can be fastened by wood blocks that keep the window in place.

Step 5 – Seal your window from the elements
The last step and energy saving one at that is to caulk around the window to provide a barrier to the elements. Caulking not only waterproofs the window but provides a barrier where heat cannot escape to the outside. If you have a large gap between the window and the side wall you can also think about placing some small strips of insulation in between the two surfaces.

Not many people choose to install their own house windows, but if you are savvy enough and have the patients it can be a cheap and rewarding experience.

No comments »

There are many types of house windows available to homeowners. Each type has unique characteristics that can compliment the design in your home. Depending on your home improvement project replacement windows of the same type are easy installed. If you decide to change out the type of window there can be some construction costs involved to properly prep the window frame. The most commonly used window types are listed below.

Awning Windows: These windows have hinges at the top and open outward, so from the outside of the home the windows have an awning effect. Awning windows are great when it is raining since you can open the window and the rain cannot come inside of the opening.

Casement Windows:These windows have a hinge on the side and open outward via a crank system. These windows are great when installed over a sink of bathtub where leaning over the window to try to push it up can be difficult. Most casement windows can open up to 90 degrees, which allows for breezes to enter the home.

Double Hung Windows: This is the most common type of house windows used. They open by pushing the bottom window up. These windows stay within the footprint of the home so are perfect when installing near walkways or low clearance areas.

Gliding Windows: Gliding windows open side to side, where one window slides over the other. These windows like double hung windows do not protrude outward so they are ideal for being installed near high traffic areas.

Picture Windows: Picture Windows, commonly called called Fixed Windows, do not open at all. They are purely for decoration and the allowance of light to enter the room. Picture windows are usually installed between or next to another window that can open, usually double hung windows.

Bay Windows:Bay windows protrude from the wall of the home allowing for a larger circle of view. Sometimes the side windows on a bay window will open outward via a crank system, but other bay windows have all fixed windows in side. Bay windows tend to change the outside look of the home and are mainly used for architectural style.

As you can see therer are many different types of house windows available for your home. The design and type really depends on your indivuidal stlye and the type of room you are installing the window into. Be sure to consult with a contractor if your window installation is not simply a replacement window of the same type.

1 Comment »